Skip to main content
MagTriXX Parallelunterlagen

Parallelunterlagen Satz

Verwenden Sie unsere Filter für die schnelle Suche durch unsere Auswahl an Sets. So finden Sie schnell den passenden Parallelunterlagen Satz für Sie.

Filter
parallel bar set / 5 Pair 15/23/28/30/32x90x2.5mm
TECHNICAL DATA MACHINIST PARALLEL SET parallel bar wide 2.5 mm parallel bars 5 Pair parallel bar lenght 90 mm parallel bar height 15/23/28/30/32 mm height tolerance +/- 0,01 mm wide tolerance +/-0,01 mm material hardened and distortion-free tool steel coating burnished magnet typ neodyn-magnet FEATURES MACHINIST PARALLEL SET flexible and rational clamping Reduces setup time by up to 10% Locking without screws Drilling close to the vice possible Optimized single-sided magnetic adhesion Couplable application for faceted parts Precision ground as pairs Magnets embossed instead of glued in PRODUCT DESCRIPTION MACHINIST PARALLEL SET The high-quality machinist parallel set supports facilitate work and guarantee rational and flexible setup for maximum productivity. Designed for parallel holding of workpieces in vises and fixtures, their clever design reduces setup times by at least 10%.The strong magnets on the inside make screwed or clamped connections superfluous and at the same time secure the area between the clamping jaws and the base against dirt and chip infestation for maximum precision. They are placed with a flick of the wrist and eliminate the need for tedious clamping and screwing. The arrangement of the magnets and the magnetic adhesion is optimized. Since the outside of the parallel pads is hardly magnetic, in contrast to the inside, fewer chips are caught during machining here as well, which makes maintenance and cleaning much easier. A prerequisite for trouble-free multi-sided and complete machining on machining centers is unobstructed access to the workpiece on as many sides as possible. Since the MagTriXX parallel shims are only 2.5 mm thick, they serve as a secure base but still allow maximum clearance under the workpiece for drilling even close to the clamping. The strong neodymium magnet ensures that the parallel pads do not slip during multi-sided machining on swivel tables. The parallel pad magnets are imprinted with a specially developed and patented process, so that loosening of the magnets is no longer possible. Improve your CNC setup with our machinist parallel bar. Witness the magic of magnets in enhancing precision and efficiency! SCOPE OF DELIVERY MACHINIST PARALLEL SET product type parallel bars numbers 5 Pair item number VMA0010007 EAN / GTIN 9180013240073 Plastic case for 5 pairs of parallel bars

US$297.60*
parallel bar set / 5 Pair 20/27/29/31/32x100x2.5mm
PARALLEL BARS SET THIN parallel bars wide 2.5 mm parallel bars 5 Pair parallel bars lenght 100 mm parallel bars height 20/27/29/31/32 mm height tolerance +/- 0,01 mm wide tolerance +/-0,01 mm material hardened and distortion-free tool steel coating burnished magnets typ neodyn-magnet PARALLEL BARS THIN SET flexible and rational clamping Reduces setup time by up to 10% Locking without screws Optimized single-sided magnetic adhesion Drilling close to the vice possible Couplable application for faceted parts Precision ground as pairs Magnets embossed instead of glued in PARALLEL BAR SET THIN The efficient magnetic parallel supports streamline tasks, ensuring adaptable setups for peak productivity. Engineered for concurrent gripping of workpieces in vises and fixtures, their intelligent design minimizes setup durations by at least 10%. Internal robust magnets render unnecessary the use of screws or clamps, simultaneously safeguarding the region between the clamping jaws and the base from debris and chip intrusions, guaranteeing utmost precision. They effortlessly snap into place, eliminating the laborious process of clamping and screwing. Optimized magnet positioning and magnetic adherence enhance functionality. As the outer sections of the slender parallel bars possess minimal magnetic properties in contrast to their interiors, they trap fewer chips during machining, simplifying maintenance and cleaning. Seamless access to the workpiece from multiple angles is crucial for unhindered multi-sided machining on machining centers. At a mere 2.5 mm thickness, the MagTriXX parallel shims provide a stable foundation yet allow ample space beneath the workpiece for drilling, even in close proximity to the clamping area. The potent neodymium magnet prevents slippage of the parallel pads during multi-sided machining on swivel tables. Through a specially developed and patented process, the parallel pad magnets are imprinted, preventing any possibility of loosening.e. Unleash your workshop's full potential with our top-tier metric parallel bars and CNC accessories. Quality you can trust! SCOPE OF DELIVERY PARALLEL BARS THIN product type parallel bars numbers 5 Pairs item number VMA0010002 EAN/GTIN 9180013240028 Plastic case for 5 pairs of parallel bars

US$309.60*
parallel bar set / 5 Pair 15/30/35/37/39x125x2.5mm
TECHNICAL DATA MAGNETIC PARALLEL PADS parallel bar wide 2.5 mm parallel bars 5 Pair parallel bar lenght 125 mm parallel bar height 15/30/35/37/39 mm height tolerance +/- 0,01 mm wide tolerance +/-0,01 mm material hardened and distortion-free tool steel coating burnished magnet typ neodyn-magnet Features MAGNETIC PARALLEL PADS flexible and rational clamping Reduces setup time by up to 10% Locking without screws Drilling close to the vice possible Optimized single-sided magnetic adhesion Couplable application for faceted parts Precision ground as pairs Magnets embossed instead of glued in PRODUCT DESCRIPTION MAGNETIC PARALLEL PADS The high-quality magnetic parallel supports facilitate work and guarantee rational and flexible setup for maximum productivity. Designed for parallel holding of workpieces in vises and fixtures, their clever design reduces setup times by at least 10%.The strong magnets on the inside make screwed or clamped connections superfluous and at the same time secure the area between the clamping jaws and the base against dirt and chip infestation for maximum precision. They are placed with a flick of the wrist and eliminate the need for tedious clamping and screwing. The arrangement of the magnets and the magnetic adhesion is optimized. Since the outside of the magnetic parallel pads is hardly magnetic, in contrast to the inside, fewer chips are caught during machining here as well, which makes maintenance and cleaning much easier. A prerequisite for trouble-free multi-sided and complete machining on machining centers is unobstructed access to the workpiece on as many sides as possible. Since the MagTriXX parallel shims are only 2.5 mm thick, they serve as a secure base but still allow maximum clearance under the workpiece for drilling even close to the clamping. The strong neodymium magnet ensures that the parallel pads do not slip during multi-sided machining on swivel tables. The parallel pad magnets are imprinted with a specially developed and patented process, so that loosening of the magnets is no longer possible. Crafted with precision, our high-quality thin magnetic parallel pads enhance your CNC operations. Experience the difference today! SCOPE OF DELIVERY MAGNETIC PARALLEL PADS product type parallel bars numbers 5 Pair item number VMA0010001 EAN / GTIN 9180013240011 Plastic case for 5 pairs of parallel bars

US$321.60*
parallel bar set / 5 Pair 25/35/40/45/47x150x2.5mm
TECHNICAL DATA MACHINIST PARALLEL SET parallel bar wide 2.5 mm parallel bars 5 Pair parallel bar lenght 150 mm parallel bar height 25/35/40/45/47 mm height tolerance +/- 0,01 mm wide tolerance +/-0,01 mm material hardened and distortion-free tool steel coating burnished magnet typ neodyn-magnet Features MACHINIST PARALLEL SET flexible and rational clamping Reduces setup time by up to 10% Locking without screws Drilling close to the vice possible Optimized single-sided magnetic adhesion Couplable application for faceted parts Precision ground as pairs Magnets embossed instead of glued in PRODUCT DESCRIPTION MACHINIST PARALLEL SET The high-quality magnetic parallel supports facilitate work and guarantee rational and flexible setup for maximum productivity. Designed for parallel holding of workpieces in vises and fixtures, their clever design reduces setup times by at least 10%.The strong magnets on the inside make screwed or clamped connections superfluous and at the same time secure the area between the clamping jaws and the base against dirt and chip infestation for maximum precision. They are placed with a flick of the wrist and eliminate the need for tedious clamping and screwing. The arrangement of the magnets and the magnetic adhesion is optimized. Since the outside of the parallel pads is hardly magnetic, in contrast to the inside, fewer chips are caught during machining here as well, which makes maintenance and cleaning much easier. A prerequisite for trouble-free multi-sided and complete machining on machining centers is unobstructed access to the workpiece on as many sides as possible. Since the MagTriXX machinist parallel set is only 2.5 mm thick, they serve as a secure base but still allow maximum clearance under the workpiece for drilling even close to the clamping. The strong neodymium magnet ensures that the parallel pads do not slip during multi-sided machining on swivel tables. The parallel pad magnets are imprinted with a specially developed and patented process, so that loosening of the magnets is no longer possible. Experience the perfect blend of magnetic innovation and high-quality materials. Elevate your CNC setup with MagTriXX today! SCOPE OF DELIVERY MACHINIST PARALLEL SET product type parallel bars numbers 5 Pair item number VMA0010008 EAN / GTIN 9180013240080 Plastic case for 5 pairs of parallel bars

US$338.40*
parallel bar set / 5 Pair 15/23/28/30/32x90x5mm
TECHNICAL DATA VISE JAW PADS parallel bar wide 5 mm parallel bars 5 Pair parallel bar lenght 90 mm parallel bar height 15/23/28/30/32 mm height tolerance +/- 0,01 mm wide tolerance +/-0,01 mm material hardened and distortion-free tool steel coating burnished magnet typ neodyn-magnet FEATURES VISE JAW PADS flexible and rational clamping Reduces setup time by up to 10% Locking without screws Drilling close to the vice possible Optimized single-sided magnetic adhesion Couplable application for faceted parts Precision ground as pairs Magnets embossed instead of glued in PRODUCT DESCRIPTION VISE JAW PADS The high-quality magnetic parallel supports facilitate work and guarantee rational and flexible setup for maximum productivity. Designed for parallel holding of workpieces in vises and fixtures, their clever design reduces setup times by at least 10%.The strong magnets on the down side make screwed or clamped connections superfluous and at the same time secure the area between the clamping jaws and the base against dirt and chip infestation for maximum precision. They are placed with a flick of the wrist and eliminate the need for tedious clamping and screwing. The arrangement of the magnets and the magnetic adhesion is optimized. Since the outside of the parallel pads is hardly magnetic, in contrast to the inside, fewer chips are caught during machining here as well, which makes maintenance and cleaning much easier. A prerequisite for trouble-free multi-sided and complete machining on machining centers is unobstructed access to the workpiece on as many sides as possible. Since the MagTriXX parallel shims are only 2.5 mm thick, they serve as a secure base but still allow maximum clearance under the workpiece for drilling even close to the clamping. The strong neodymium magnet ensures that the parallel pads do not slip during multi-sided machining on swivel tables. The parallel pad magnets are imprinted with a specially developed and patented process, so that loosening of the magnets is no longer possible. Maximum productivity with MagTriXX - Magnetic spanning pads that increase your efficiency. Quality you can trust. SCOPE OF DELIVERY VISE JAW PADS product type parallel bars numbers 5 Pair item number VMA0010013 EAN / GTIN 9180013240134 5 pairs of vise jaw pads

US$342.00*
parallel bar set / 5 Pairs 15/23/28/30/32x90x10mm
TECHNICAL DATA ADAPTIVE JAW parallel bar wide 10 mm parallel bars 5 Pair parallel bar lenght 90 mm parallel bar height 15/23/28/30/32 mm height tolerance +/- 0,01 mm wide tolerance +/-0,01 mm material hardened and distortion-free tool steel coating burnished magnet typ neodyn-magnet FEATURES ADAPTIVE JAW flexible and rational clamping Reduces setup time by up to 10% Locking without screws Drilling close to the vice possible Optimized single-sided magnetic adhesion Couplable application for faceted parts Precision ground as pairs Magnets embossed instead of glued in PRODUCT DESCRIPTION ADAPTIVE JAW SET The high-quality magnetic parallel supports facilitate work and guarantee rational and flexible setup for maximum productivity. Designed for parallel holding of workpieces in vises and fixtures, their clever design reduces setup times by at least 10%.The strong magnets on the down side make screwed or clamped connections superfluous and at the same time secure the area between the clamping jaws and the base against dirt and chip infestation for maximum precision. They are placed with a flick of the wrist and eliminate the need for tedious clamping and screwing. The arrangement of the magnets and the magnetic adhesion is optimized. Since the outside of the parallel pads is hardly magnetic, in contrast to the inside, fewer chips are caught during machining here as well, which makes maintenance and cleaning much easier. A prerequisite for trouble-free multi-sided and complete machining on machining centers is unobstructed access to the workpiece on as many sides as possible. Since the MagTriXX parallel shims are only 2.5 mm thick, they serve as a secure base but still allow maximum clearance under the workpiece for drilling even close to the clamping. The strong neodymium magnet ensures that the parallel pads do not slip during multi-sided machining on swivel tables. The parallel pad magnets are imprinted with a specially developed and patented process, so that loosening of the magnets is no longer possible. MagTriXX - Because quality counts – Clamping tools and CNC accessories of the highest quality. Make the difference. SCOPE OF DELIVERY ADAPTIVE JAW product type parallel bars numbers 5 Pair item number VMA0010016 EAN / GTIN 9180013240165 5 pairs of flat jaw vise

US$349.00*
parallel bar set / 5 Pair 22/30/37/42/47x160x2.5mm
parallel pads parallel pads wide 2.5 mm parallel pads 5 Pair parallel pads lenght 160 mm parallel pads height 22/30/37/42/47mm height tolerance +/- 0,01 mm wide tolerance +/-0,01 mm material hardened and distortion-free tool steel coating burnished magnet typ neodyn-magnet parallel pads magnetic flexible and rational clamping Reduces setup time by up to 10% Locking without screws Drilling close to the vice possible Optimized single-sided magnetic adhesion Couplable application for faceted parts Precision ground as pairs Magnets embossed instead of glued in Locking without screws The high-quality magnetic parallel supports facilitate work and guarantee rational and flexible setup for maximum productivity. Designed for parallel holding of workpieces in vises and fixtures, their clever design reduces setup times by at least 10%.The strong magnets on the inside make screwed or clamped connections superfluous and at the same time secure the area between the clamping jaws and the base against dirt and chip infestation for maximum precision. They are placed with a flick of the wrist and eliminate the need for tedious clamping and screwing. The arrangement of the magnets and the magnetic adhesion is optimized. Since the outside of the parallel pads is hardly magnetic, in contrast to the inside, fewer chips are caught during machining here as well, which makes maintenance and cleaning much easier. A prerequisite for trouble-free multi-sided and complete machining on machining centers is unobstructed access to the workpiece on as many sides as possible. Since the MagTriXX parallel shims are only 2.5 mm thick, they serve as a secure base but still allow maximum clearance under the workpiece for drilling even close to the clamping. The strong neodymium magnet ensures that the parallel pads do not slip during multi-sided machining on swivel tables. The parallel pad magnets are imprinted with a specially developed and patented process, so that loosening of the magnets is no longer possible. Revolutionize your CNC projects with our magnetic parallels on milling machines. Superior quality for outstanding results. Explore our range now! SCOPE OF DELIVERY PARALLEL BARS THIN product type parallel pads numbers 5 Pairs item number VMA0010003 EAN / GTIN 9180013240035 Plastic case for 5 pairs of parallel pads

US$352.80*
parallel bar set / 5 Pair 25/40/47/52/57x200x2.5mm
TECHNICAL DATA PARALLEL BLOCKS parallel bar wide 2.5 mm parallel bars 5 Pair parallel bar lenght 200 mm parallel bar height 25/40/47/52/57 mm height tolerance +/- 0,01 mm wide tolerance +/-0,01 mm material hardened and distortion-free tool steel coating burnished magnet typ neodyn-magnet Features PARALLEL BLOCKS flexible and rational clamping Reduces setup time by up to 10% Locking without screws Drilling close to the vice possible Optimized single-sided magnetic adhesion Couplable application for faceted parts Precision ground as pairs Magnets embossed instead of glued in PRODUCT DESCRIPTION PARALLEL BLOCKS The high-quality magnetic parallel supports facilitate work and guarantee rational and flexible setup for maximum productivity. Designed for parallel holding of workpieces in vises and fixtures, their clever design reduces setup times by at least 10%.The strong magnets on the inside make screwed or clamped connections superfluous and at the same time secure the area between the clamping jaws and the base against dirt and chip infestation for maximum precision. They are placed with a flick of the wrist and eliminate the need for tedious clamping and screwing. The arrangement of the magnets and the magnetic adhesion is optimized. Since the outside of the parallel blocks is hardly magnetic, in contrast to the inside, fewer chips are caught during machining here as well, which makes maintenance and cleaning much easier. A prerequisite for trouble-free multi-sided and complete machining on machining centers is unobstructed access to the workpiece on as many sides as possible. Since the MagTriXX parallel blocks are only 2.5 mm thick, they serve as a secure base but still allow maximum clearance under the workpiece for drilling even close to the clamping. The strong neodymium magnet ensures that the parallel pads do not slip during multi-sided machining on swivel tables. The parallel pad magnets are imprinted with a specially developed and patented process, so that loosening of the magnets is no longer possible. Experience the perfect blend of magnetic innovation and high-quality Take your CNC work to the next level with our magnetic parallels. Designed for artisans who demand only the best. SCOPE OF DELIVERY PARALLEL BLOCKS product type parallel bars numbers 5 Pair item number VMA0010009 EAN / GTIN 9180013240097 Plastic case for 5 pairs of parallel bars

US$375.60*
parallel bar set / 5 Pairs 20/30/35/37/39x125x10mm
TECHNICAL DATA FLAT JAW VISE parallel bar wide 10 mm parallel bars 5 Pair parallel bar lenght 125 mm parallel bar height 20/30/35/37/39 mm height tolerance +/- 0,01 mm wide tolerance +/-0,011 mm material hardened and distortion-free tool steel coating burnished magnet typ neodyn-magnet FEATURES FLAT JAW VISE flexible and rational clamping Reduces setup time by up to 10% Locking without screws Drilling close to the vice possible Optimized single-sided magnetic adhesion Couplable application for faceted parts Precision ground as pairs Magnets embossed instead of glued in PRODUCT DESCRIPTION FLAT JAW VISE The high-quality magnetic parallel supports facilitate work and guarantee rational and flexible setup for maximum productivity. Designed for parallel holding of workpieces in vises and fixtures, their clever design reduces setup times by at least 10%.The strong magnets on the down side make screwed or clamped connections superfluous and at the same time secure the area between the clamping jaws and the base against dirt and chip infestation for maximum precision. They are placed with a flick of the wrist and eliminate the need for tedious clamping and screwing. The arrangement of the magnets and the magnetic adhesion is optimized. Since the outside of the parallel pads is hardly magnetic, in contrast to the inside, fewer chips are caught during machining here as well, which makes maintenance and cleaning much easier. A prerequisite for trouble-free multi-sided and complete machining on machining centers is unobstructed access to the workpiece on as many sides as possible. Since the MagTriXX flat jaw vise are only 2.5 mm thick, they serve as a secure base but still allow maximum clearance under the workpiece for drilling even close to the clamping. The strong neodymium magnet ensures that the parallel pads do not slip during multi-sided machining on swivel tables. The parallel pad magnets are imprinted with a specially developed and patented process, so that loosening of the magnets is no longer possible. Your workshop deserves the best - High quality milling supports and CNC accessories. Rely on quality. SCOPE OF DELIVERY FLAT JAW VISE product type parallel bars numbers 5 Pair item number VMA0010017 EAN / GTIN 9180013240172 5 pairs of flat jaw vise

US$389.00*
parallel bar set / 5 Pair 25/37/42/45/47x160x5mm
TECHNICAL DATA PARALLEL BAR GAUGE parallel bar wide 5 mm parallel bars 5 Pair parallel bar lenght 160 mm parallel bar height 25/37/42/45/47 mm height tolerance +/- 0,01 mm wide tolerance +/-0,01 mm material hardened and distortion-free tool steel coating burnished magnet typ neodyn-magnet FEATURES PARALLEL BAR GAUGE flexible and rational clamping Reduces setup time by up to 10% Locking without screws Drilling close to the vice possible Optimized single-sided magnetic adhesion Couplable application for faceted parts Precision ground as pairs Magnets embossed instead of glued in PRODUCT DESCRIPTION PARALLEL BAR GAUGE SET The high-quality magnetic parallel supports facilitate work and guarantee rational and flexible setup for maximum productivity. Designed for parallel holding of workpieces in vises and fixtures, their clever design reduces setup times by at least 10%.The strong magnets on the down side make screwed or clamped connections superfluous and at the same time secure the area between the clamping jaws and the base against dirt and chip infestation for maximum precision. They are placed with a flick of the wrist and eliminate the need for tedious clamping and screwing. The arrangement of the magnets and the magnetic adhesion is optimized. Since the outside of the parallel pads is hardly magnetic, in contrast to the inside, fewer chips are caught during machining here as well, which makes maintenance and cleaning much easier. A prerequisite for trouble-free multi-sided and complete machining on machining centers is unobstructed access to the workpiece on as many sides as possible. Since the MagTriXX parallel shims are only 2.5 mm thick, they serve as a secure base but still allow maximum clearance under the workpiece for drilling even close to the clamping. The strong neodymium magnet ensures that the parallel pads do not slip during multi-sided machining on swivel tables. The parallel pad magnets are imprinted with a specially developed and patented process, so that loosening of the magnets is no longer possible. The future of CNC machining - Discover our high-quality CNC accessories. Quality that will inspire you. SCOPE OF DELIVERY PARALLEL BAR GAUGE product type parallel bars numbers 5 Pair item number VMA0010015 EAN / GTIN 9180013240158 5 pairs of parallel bar gauge

US$399.00*
parallel bar set / 5 Pairs 25/37/42/45/47x160x10mm
TECHNICAL DATA MAGNETIC PARALLEL SUPPORTS parallel bar wide 10 mm parallel bars 5 Pair parallel bar lenght 160 mm parallel bar height 25/37/42/45/47 mm height tolerance +/- 0,01 mm wide tolerance +/-0,01 mm material hardened and distortion-free tool steel coating burnished magnet typ neodyn-magnet Features MAGNETIC PARALLEL SUPPORTS flexible and rational clamping Reduces setup time by up to 10% Locking without screws Drilling close to the vice possible Optimized single-sided magnetic adhesion Couplable application for faceted parts Precision ground as pairs Magnets embossed instead of glued in PRODUCT DESCRIPTION MAGNETIC PARALLEL SUPPORTS The high-quality magnetic parallel supports facilitate work and guarantee rational and flexible setup for maximum productivity. Designed for parallel holding of workpieces in vises and fixtures, their clever design reduces setup times by at least 10%.The strong magnets on the down side make screwed or clamped connections superfluous and at the same time secure the area between the clamping jaws and the base against dirt and chip infestation for maximum precision. They are placed with a flick of the wrist and eliminate the need for tedious clamping and screwing. The arrangement of the magnets and the magnetic adhesion is optimized. Since the outside of the parallel pads is hardly magnetic, in contrast to the inside, fewer chips are caught during machining here as well, which makes maintenance and cleaning much easier. A prerequisite for trouble-free multi-sided and complete machining on machining centers is unobstructed access to the workpiece on as many sides as possible. Since the MagTriXX magnetic parallel supports are only 2.5 mm thick, they serve as a secure base but still allow maximum clearance under the workpiece for drilling even close to the clamping. The strong neodymium magnet ensures that the parallel supports do not slip during multi-sided machining on swivel tables. The parallel pad magnets are imprinted with a specially developed and patented process, so that loosening of the magnets is no longer possible. CNC accessories for professionals - Our magnetic parallel supports take your production to the next level. Trust in our quality! SCOPE OF DELIVERY MAGNETIC PARALLEL SUPPORTS product type parallel bars numbers 5 Pair item number VMA0010018 EAN / GTIN 9180013240189 5 pairs of parallel supports

US$419.00*
parallel bar set / 5 Pairs 20/30/35/37/39x125x5mm
parallel bar thin parallel bar wide 5 mm parallel bars 5 Pair parallel  lenght 125 mm parallels bar height 20/30/35/37/39 mm height tolerance +/- 0,01 mm wide tolerance +/-0,01 mm material hardened and distortion-free tool steel coating burnished magnet typ neodyn-magnet machinist parallels rational and flexibel clamping Reduces setup time by up to 10% Locking without screws Drilling close to the vice possible Optimized single-sided magnetic adhesion Couplable application for faceted parts Precision ground as pairs Magnets embossed instead of glued in MACHINIST PARALLEL SET Unleash your workshop's full potential with our top-tier magnetic parallel bars and CNC accessories.The high-quality magnetic parallel supports facilitate work and guarantee rational and flexible setup for maximum productivity. Designed for parallel holding of workpieces in vises and fixtures, their clever design reduces setup times by at least 10%.The strong magnets on the down side make screwed or clamped connections superfluous and at the same time secure the area between the clamping jaws and the base against dirt and chip infestation for maximum precision. They are placed with a flick of the wrist and eliminate the need for tedious clamping and screwing. The arrangement of the magnets and the magnetic adhesion is optimized. Since the outside of the parallel pads is hardly magnetic, in contrast to the inside, fewer chips are caught during machining here as well, which makes maintenance and cleaning much easier. A prerequisite for trouble-free multi-sided and complete machining on machining centers is unobstructed access to the workpiece on as many sides as possible. Since the MagTriXX parallel shims are only 2.5 mm thick, they serve as a secure base but still allow maximum clearance under the workpiece for drilling even close to the clamping. The strong neodymium magnet ensures that the parallel pads do not slip during multi-sided machining on swivel tables. The parallel pad magnets are imprinted with a specially developed and patented process, so that loosening of the magnets is no longer possible. Increase your efficiency - with our thin parallel pads. Quality that convinces. SCOPE OF DELIVERY MACHINIST PARALLEL SET product type parallel bars numbers 5 Pair item number VMA0010014 EAN / GTIN 9180013240141 5 pairs of machinist parallel bars

US$429.00*

Parallelunterlagen Set

Parallel Unterlagen werden beim Fräsen als Hilfsmittel zur Werkstück-Aufspannung eingesetzt. Sie haben eine doppelte Funktion: Zum einen können sie in Verbindung mit einem Maschinenschraubstock verwendet werden, zum anderen können sie als Unterlage dienen, wenn das Werkstück direkt auf dem Arbeitstisch aufgespannt wird. Durch die Verwendung von magnetischen Parallel Unterlagen wird ein schnelles und sauberes Rüsten ermöglicht.

Finden Sie den passenden Parallelunterlagen Satz für Ihren Bedarf. Wir stehen jederzeit für spezielle Anfragen zu unseren Produkten zur Verfügung.